Kel tec p 11 supressed
The weight of a 22 Magnum-rated suppressor, such as Gemtech WMR, is negligible and doesn’t affect the balance much. 45 grain Dynapoint or 50 grain Game-Shok are the most efficient loads for suppressed use. The cycling is fairly slow for a blowback design, even with the added back pressure of a suppressor. The carbine runs sound-suppressed very well with minimal blowback and ejection port pop. Ejection is right side only, but empties go at a sufficiently forward angle to clear left-handed shooters. Based on my experience with the prototypes, the handles have been enlarged and given a slight inward curve to keep fingers from slipping off.
![kel tec p 11 supressed kel tec p 11 supressed](https://images.guns.com/prod/640832000078_1.jpg)
The non-reciprocating charging handles are on both sides of the receiver. For colt-weather use, a strip of insulating felt or foam may be added to the outside of the stock strut for a more comfortable cheekweld. I use the shorted setting for firing standing and the longest for shooting sitting. The advantages of this design are quite obvious: it collapses for storage, and the four open positions allow adjusting both to shooter arm length and to different shooting positions. I have not seen one damaged yet, but it is definitely not suitable for bashing skulls. Fortunately, replacing a damaged stock would take all of a minute, and the gun functions just fine without it. Unlike the submachine gun version of PMR-30, it uses a simple telescoping stock. Reducing the bolt weight allows stronger return spring, in turn leading to more reliable feeding from the double-stack magazine. My PMR-30 prototype was quite reliable from the start. However, that also permits slightly less bolt weight and actually works just fine in practice. 22 WMR case has more friction than bottlenecked cases, and can be harder to extract. 22 WMR ammunition is more available than. It also offers the option of 50-grain Federal Game-shok ammunition for deeper penetration. From a rifle-length barrel, it delivers 90 to 95% of 5.7’s velocity with 30 and 40 grain ammunition. It is also far more available in stores, and from more manufacturers. Caliber is the first one to be criticized.22 Magnum isn’t the most powerful of the possible chamberings, but it is compatible with PMR-30 pistol, so the same ammunition and magazines may be used.22 WMR is about half the cost of. In the discussions I’ve seen, almost every aspect of it has been questioned, so I will address those in turn. The Kel-Tec CMR-30 scoped and ready for action. Kel-Tec is on track to deliver 500 to 1,000 units by the end of 2014. Once the design and production are debugged-and they should be pretty well figured out after four years of gradual refinement-producing the firearm in useful quantities shouldn’t be a problem. It’s a blowback rimfire carbine with most parts stamped or made by simple machining. Having used CMR-30 and its predecessor RMR-30 prototypes extensively over the last three years, I feel qualified to address several points.
![kel tec p 11 supressed kel tec p 11 supressed](https://harrysholsters.com/wp-content/uploads/2021/07/Kel-Tec-CP33-Pallet-Right.jpg)
With Kel-Tec‘s announcement about shipping the first small batch of CMR-30 carbines, speculations about its future availability, performance and reliability abound.